The red color on the entire grid MADRIX DVI OUT

This forum is assigned for bug reporting. Be as much accurate as you are possible.

Moderator: MADRIX Team

Locked
FR3NK
Posts: 4
Joined: Thu Nov 24, 2011 12:42 pm

The red color on the entire grid MADRIX DVI OUT

Post by FR3NK »

Hello! Help me please, mother of the power cord madrix not lost: (I MADRIX DVI OUT ..... Madriksovskie interfaces are connected via a twisted-pair Gigabit .. now when you turn the whole diode grid in red ... how to compress the twisted couple, and how to overcome this red color on the entire grid?
Fritzsche
Support
Support
Posts: 735
Joined: Mon Oct 05, 2009 5:26 pm
Contact:

Re: The red color on the entire grid MADRIX DVI OUT

Post by Fritzsche »

Hi Fr3nk,

For DVI output, you need a MADRIX KEY that supports DVI, such as MADRIX KEY dvi start, MADRIX KEY dvi, MADRIX KEY professional, or MADRIX KEY ultimate.

If you are using a MADRIX interface, such as the MADRIX NEO or MADRIX PLEXUS, they will not activate DVI output. Their license will enable DMX-based output, such as DMX512 or Art-Net.

So if no correct license is activated through a MADRIX product, DVI output will be restricted to demo mode. In demo mode a large rotating and colorful cross is displayed on top of the DVI output.

On the other, maybe there is a misconfiguration of the DVI hardware or the MADRIX software.

Can you please send us an e-mail to info[at]madrix.com
We would like to assist you further. Thank you!
Locked