MADRIX Forum

Hello Galo77, I assume the "Execution" is set to "Always" in the DMX-IN Remote Editor. Please navigate to "Preferences" > "Device Manager..." > "DMX Input", select your input device and your remote configuration and click "Edit". The DMX-IN...

Hi commander, Question 1: If I understand correct, this could be handled by two Nebula Interfaces? RGB: - 4 x 480 pixels x 3 channels per pixel = 5760 channels = 12 universes - This means you would need 1 x MADRIX NEBULA (or more devices depending on the cabling). RGBW: - 4 x 480 pixels x 4 channels...

Hi Djé, Welcome to the MADRIX Forum. The connected component needs to be analog (0-12V). I assume a "light barrier / photoelectric sensor" or a "distance measuring sensor" would work in your case. Make sure to use a device with analog output. Still we can't recommend a certain pr...

Hi Simone_Trussdesign,

I doubt that someone is able to run MADRIX 5 on a ARM CPU, because we don't have a software version which supports those CPUs.

Hi webcentrik, Did you set the Nvidia GPU as default graphics processor for MADRIX 5? 1) Open the 'Settings' via the Windows start menu. 2) Select 'System' and navigate to the 'Display' tab. 3) Click at 'Graphics settings'. 4) Select 'Desktop app / classic app', use the 'Browse' button and navigate ...

Hi Thessom, Welcome to the MADRIX Forum! This shouldn't happen if you use unicast and two different IP address ranges for each of the network adapters. Please send us your setup and a logfile to info[at]madrix[dot]com. To save the logfile please start MADRIX and select "Tools" > "Logf...

Hi samantha@MRWalls,

Welcome to the MADRIX Forum!

Please send us your setup to info[at]madrix[dot]com. Do you have a MADRIX KEY with a MADRIX 5 license connected?

Hi JayAlbert, Welcome to the MADRIX Forum! You can achieve this by using an Art-Net interface, which supports ArtSync for the data output. All our interfaces support the ArtSync feature. You can enable ArtSync in the Device Manager of MADRIX 5. Therefore connect your interface and navigate to "...

Hi Cristar, Welcome to the MADRIX Forum. I would assume that the patch is incorrect. I recommend to check the patch using the "Highlight" feature. This allows you to illuminate certain pixels in order to find the correct location. Simply open the Patch Editor and activate the "Highlig...

Hello LukasJanßen,

Welcome to the MADRIX Forum.

Please send us the setup to info[at]madrix[dot]com.

Thanks in advance!